Inside Mount:

1. Measure the depth of the top window frame; allow at least 2" for bracket installation. Bracket attaches to the sides, not to the top, but can be installed either on the ceiling or the wall.
2. Measure the width inside the window frame, from jamb to jamb.
3. Measure the height inside the window frame, from the top jamb to the windowsill.
4. Use the shortest width and the longest height measurements.
5. Order blinds or shades in the actual window size; no deductions needed. Our factory will already make a 1/4" width deduction. 

Outside Mount:

1. Measure and order the blind or shade to be the exact size you desire, ensuring it is both wider and taller than the window.
2. The width should be about 4 inches wider than the window (2 inches on each side) to ensure no light enters from the sides.
3. The height should allow a minimum of 2 inches above the window for bracket installation. To fully clear the window when open, add 7.5 inches above window.

Cordless:

• Minimum width: 20"
• Maximum width: 72"
• Minimum height: 24"
• Maximum height: 74"

Wand tilt is on the left side only.

Production Lead Time: 1 to 2 Weeks.

Ships via Fedex Ground, from San Diego, California.

• Free shipping to continental USA
• Hawaii and Alaska shipping is available for $125 per order (limit of 10 shades)

Courtesy rush may be requested but is not guaranteed. Express shipping is available for an additional fee (only recommended for East Coast):

• FedEx Overnight - $39.99 per shade
• FedEx 2nd Day - $24.99 per shade